EMC Library & News – MAJR Products
MAJR Products Corporation is proud to offer this brand new section to the site. While this library is just now in its' infancy, we hope to grow it to one of the most respected places on the internet as an EMC knowledge base. But, of course, any undertaking such as this requires a lot of hard work, cooperation and collaboration. If you would like to have one of your submissions posted or re-published here then look to the link on the left titled "Send Us Your Piece" for instructions on how that can be accomplished. Our experts will be in touch as far as the posting.- White Papers as they relate to our site would be informational documents issued by companies highlighting the significance of their product or service, especially as it relates to the solution of a customer problem.
- Data Sheets is a page or two with very detailed information on a specific product or product family.
- Technical Articles may not adhere to the more specific guidelines of the above categories yet could discuss one or all of the above within the subject matter written.
FORM-IN-PLACE GASKETING
MAJR Products Form-in-Place automated EMI/RFI gasketing is offered to facilitate the increasing demand for shielding of smaller profile and mechanically tight tolerance areas for a variety of metal and plastic housings. Our software driven automated gasket dispensing system delivers a custom programmed precise bead of conductive elastomer to narrow flanges or edges as small as [...]
EMC symposium 2012
The IEEE International EMC Symposium (www.2012 emc.org/) was held in Pittsburgh, PA this year on August 6 to August 10 with Michael J. Oliver as Chairman, Ed Nakauchi as Vice Chair and John Vanella from Conference Direct as the Conference Manager. The symposium was an overall great success technically, with Dr. Bruce Archambeault as the [...]
HSG electrofab – a division of MAJR Products is online!
At HSG Electronics and Fabrication, we offer a wide variety of products and services including custom gaskets, air filters, tape and foam conversion, and custom fabrication. Please look on our Products and Services tabs for more information on what HSG can do for you. www.hsgelectrofab.com
Featured Product: Multicon gasketing material
If you are in need of a inexpensive conductive EMI shielding gasket that also provides environmental protection, our Multicon shielding material may be the best option for you. Multicon is one of the most common products we sell to our customers. The material consists of oriented wire in a silicone base material, which becomes conductive [...]
MAJR gaskets helped identify Bin Laden
MAJR Products gaskets were used in this military scanning device which helped to identify Bin Laden and other terrorists. Information about the unit is in the excerpt and article linked below. Commandos Use Thumb, Eye Scans to Track Terrorists http://www.wired.com/dangerroom/2011/05/csi-bin-laden-commandos-use-thumb-eye-scans-to-track-terrorists/ Here is an excerpt: According to a senior Defense Department official, chances are they used [...]
AmCon 2008 Show
Visit MAJR Products, Booth 308, at the AmCon 2008 Show in Austin, Texas held at the Lester E. Palmer Events Center. Dates are Feb. 12-13, 2008, further information on exhibits, venue, and symposiums held there can be found at www.amconshows.com. Visit Mike Oliver’s Shielding Theory and Design Presentation at 1:00 pm on February 12th. We [...]
MAJR’s First Annual Open House & Sales Conference
MAJR hosts its’ first ever Open House / Sales Conference for all of its’ sales reps in the field, Partners, Distributors and Business Associates. Lasting a full day on Friday and one-half day on Saturday a variety of both technical product presentations, production demos, facility tours and non-technical sales presentations are planned. Over 35 individuals [...]
MAJR Products Rolls Out New Web Site
After months in development MAJR recently rolled out a new corporate web site. The site has been redesigned so that design engineers and purchasing agents can more quickly get to the technical product information they seek. All product information has been designed in .PDF downloadable format as this is a standard accepted format for data [...]
MAJR Exhibits at the 2005 IEEE International Symposium on EMC in Chicago
As the premier EMC event in the country, MAJR Products Corporation has exhibited and participated in this event for a number of years. Rolling out new booth graphics, new marketing materials and showing a facelift, MAJR found exceptional customer response and came away with a number of new contacts in the field. MAJR also found [...]
MAJR Products Corporation Moves into Its’ Brand New Building
MAJR Products Corporation moved from its’ long-time home in downtown Saegertown to the rolling fields just outside of town, less than a mile from Interstate 79, which runs north/south in Pennsylvania. Space now is at 13,000 square feet and we are still busting at the seams. Who knows, we may have to add on to [...]