Shielding Requirement
Select the options below to determine your specific shielding and environmental requirements
Outdoor
Applications exposed to the elements such as rain, moisture, salt fog and uneven temperatures.
Indoor
Applications in semi-controlled environments, no rain but possible moisture and temperature variations.
Both Outdoor / Indoor
Commercial
-29C to 66C (-20F to 150F)
For applications where MIL-STD-810 design considerations and compliance is NOT required.
Military
-55C to 125C (-67F to 257F)
For applications where MIL-STD-810 design considerations and compliance IS required.
Office
Temperature and Humidity Control
(NEMA 1 or IP 10)
Indoor use, protection for personnel against access to hazardous parts, protection against ingress of solid foreign objects or falling dirt.
Warehouse
Non-Temperature / Humidity Control
(NEMA 12 or IP 52)
Indoor use, protection for personnel against access to hazardous parts, falling solid foreign objects, circulating dust, lint, fibers, and the ingress of dripping water and light splashing.
Environment Marine
(NEMA 4 or IP 56)
Indoor and outdoor use, protection for personnel against access of hazardous parts, falling solid foreign objects, windblown dust and the ingress of rain, sleet and snow, splashing water and hose directed water.
Environment Land / Desert
(NEMA 3 or IP 54)
Indoor and outdoor use, protection for personnel against access of hazardous parts, falling solid foreign objects, windblown dust and the ingress of rain, sleet and snow.
Environment Marine
(NEMA 4 or IP 56)
Indoor and outdoor use, protection for personnel against access of hazardous parts, falling solid foreign objects, windblown dust and the ingress of rain, sleet and snow, splashing water and hose directed water.
Environment Land / Desert
(NEMA 3 or IP 54)
Indoor and outdoor use, protection for personnel against access of hazardous parts, falling solid foreign objects, windblown dust and the ingress of rain, sleet and snow.
Your Shielding Type:A
Your Shielding Type:B
Your Shielding Type:C
Your Shielding Type:D
Your Shielding Type:E
Your Shielding Type:F
Use the letter displayed above with the Shield Selection Chart displayed below or
click here to start over.
| Enclosure Door / Cover |
 |
 |
 |
 |
 |
 |
 |
| Product Name |
Conductive Elastomer |
Fingerstock Gasket |
Shield Strip Gasket |
Multicon Gasket |
Knitted Wire Gasket |
Conductive Fabric |
Conductive Window |
| NEMA / IP (Dependent on Configuration) |
A, B, C, D, E, F |
E, F |
A, B, E, F |
A, B, C, D, E, F |
E, F |
E, F |
A, B, C, D, E, F |
| MIL-STD-461 (Dependent on Configuration) |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
| Enclosure Intake / Exhause |
 |
 |
 |
|
|
|
|
| Product Name |
Vent Panel |
Air Filter |
Frame Gasket |
|
|
|
|
| NEMA / IP (Angled Honeycomb) |
E, F |
E, F |
E, F |
|
|
|
|
| MIL-STD-461 (Dependent on Configuration) |
Yes |
Yes |
Yes |
|
|
|
|
| Enclosure Connector / Cable |
 |
|
 |
 |
 |
|
|
| Product Name |
Wire Mesh Tape |
Metal Foil Tape |
Ferrite Material |
Wire Mesh Washer |
Connector Gasket |
|
|
| NEMA / IP (Dependent on Configuration) |
N/A |
N/A |
N/A |
E, F |
A, B, C, D, E, F |
|
|
| MIL-STD-461 (Dependent on Configuration) |
Yes |
Yes |
Yes |
Yes |
Yes |
|
|
| Enclosure Electronics |
 |
 |
|
|
|
|
|
| Product Name |
Board Level Shield |
Absorber Material |
|
|
|
|
|
| NEMA / IP (Dependent on Configuration) |
N/A |
N/A |
|
|
|
|
|
| MIL-STD-461 |
Yes |
Yes |
|
|
|
|
|